Job Description Summary

Job Description

Key Responsibilities

Blasting:

Perform abrasive blasting using Nickle oxide on metal components according to work instructions and specifications.
Set up blasting equipment, adjust pressure and media flow to achieve required surface profile and cleanliness.
Verify the blasting surface finish according to the requirement.
Collect and segregate the used blasting media for disposal according to schedule waste requirement.

Tack Weld

Performing spot weld resistance welding to temporarily holding the metal sheet and honeycomb for brazing process.
Set up and operate the spot welding including managing the consumable required such as electrode and copper sheet.
Produce spot weld that meet specified requirement and able to hold for brazing process.
Perform basic inspection on the spot weld quality.

Brazing

Mixing the braze material as per specified work instruction (weighing and mixing).
Applying brazes paste/powder uniformly across the metal plate.
Managing the braze paste and braze fixture FIFO and correct material requirement.
Applying stop off paste and pen on the component.
Perform visual inspection on the seal prior to brazing to ensure complete coverage.

Safety

Strict follow all the safety procedures and JSA
Maintain workplace orderly and responsible in disposing excess material
Follow company policies and site rules
Understand and comply with Safety Data Sheets (SDS) for all chemicals used braze application
Segregate and dispose of spent media, contaminated rags, and chemical waste in accordance with environmental procedures and regulations
Immediately report unsafe conditions, spills, near misses, and incidents.

Quality & Documentation

Perform work in accordance with specified quality standards and tolerances.
Inspect work pieces and ensure component are clean prior process.
Report defects, nonconformities, or material issues to the supervisor.
Complete basic production records, checklists, and log sheets as required.

Equipment & Tool Care

Check tools before use; ensure they are in good condition and suitable for the job.
Perform basic maintenance and cleaning of PPE and equipment after use.

Requirements

Minimum SPM or equivalent; vocational/technical training is an advantage.
Prior experience in a workshop or component repair environment is preferred.
Basic understanding of tools and equipment used in cleaning, blending, and welding.
Ability to follow instructions, read work orders, and complete tasks with attention to detail.
Physically fit and able to handle manual labor.
Willingness to learn and adapt to different repair processes.

About Us

Aero Service Technologies Malaysia is an emerging company with solid experience in overhauling aeroderivative turbines. Our Port Klang facility aims to become a center of excellence for the aeroderivative components repair in the APAC Region, dedicated to innovation and operational excellence. We seek motivated candidates who wish to contribute to our ambitious goals and be part of a dynamic team.

Equal Opportunity Employer

Aero Service Technologies Malaysia is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability or any other status protected by applicable law. Safety is our top priority, and we are dedicated to maintaining a safe workplace for all employees.

Additional Information

Relocation Assistance Provided: No

Aero Alliance General Technician

Aero Alliance - General Technician